How we made it and what we used: three important challanges to solve big customer’s needs in chemicals, adhesives and cosmetics production
The customer presented in this case-history is a global company and a world leader in adhesives, cosmetic, detergents and home-care products.
During the assessment-step related to a new production plant construction, the customer contacts Tecnosida® requiring project evaluation and design for two VOC abatement systems deeply customized on production process needs.
Chemical intermediates and raw materials (such as epoxy and silicone resins) are extensively used in the production lines; these substances contain variable amounts of calcium carbonate, carbon black and crosslinking resins.
Given the explosive nature of the compounds, the system Tecnosida puts forward shall comply with ATEX norms.
After a technical site inspection, Tecnosida® designed a complete solution that guarantees:
The complete system was designed to meet specifical binding requirements of italian health and environment legislation.
Tecnosida® designs a suction and ventilation line composed of 20 collection points able to capture all pollutants directly at the source. The whole system was projected and balanced with regards to the possibility, given to each user/point, to open/close the local suction point due to non-continuous activities developed.
According to specific dimensions, quality and profile of each operative area, suction arms, hoods and fittings were selected and applied to ensure best efficency and efficacy.
All the system, and each one of the components, has been designed in accordance with the ATEX directive 94/9/CE-99/92/CE DPR126/98 and completed with an equipotential connection of metal mass for grounding.
Due to the mixed nature of main pollutants to be treated, two air treatment lines have been designed and manufactured, was given installation to a multi-stage abatement systems.
An ATEX II 3 D certified cyclone system, made of carbon steel for dusty compounds pre-separation was designed and installed. This stage is used to pre-separate dust up to a certain granulometry and was completed with rotary valve for discharge.
A Dustdown® self-cleaning bag filter was installed to remove fine dust and particulate matter (PM). This filter was equipped with anti-explosion safety panels and designed to comply with ATEX standard;
Finally, a Chemsorb® active carbon purifier for adsorption of fumes and chemical vapors (VOC) present in the flow was designed and installed. This purifier was equipped with safety panels and is ATEX II 3 GD compliant too.
The turnkey system delivery included electrical panel, connection of utilities and pressure inverters / stabilizers for ventilation management.
Our specialized technicians have carried out final testing and calibration of all managed parameters of the plant.
Tecnosida® multi-stage filtration systems were realized in compliance with Lombardy BAT- Best Available Technologies (D.MF.01, AC.RI.01 and D.MM.01) and was able to reduce pollutants emissions in compliance with all limits established by national and local legislation.
The customer presented in this case history is a global company that operates in the chemical sector developing, producing and marketing chemical specialties and intermediate products. For this reasons production processes considered here are dedicated to create multiple compounds, including anionic and cationic surfactants, polyurethanes, adhesives, sealants and chemicals specialities for textile industry.
For its typical production processes, the chemical plant where the solution described below was adopted shows a non-stop (24h) operation system and is characterized by complex connection points, many mixing areas, vat and piece washing equipments and component/raw materials loading units. With such a different and distributed range of process, sub-process and operations, the first step taken into account was an internal assessment to define which specific needs were relevant as far air pollution control was concerned.
The output of this analysis indicated that there was a clear necessity to:
The two groups of pollutants listed above, besides, were mixed toghether and is mixture of dust and solvents, in relation to its chemical-physical characteristics, could be flammable and even explosive.
This elements indicated that all filtration and abatement system should be designed and manufactured in accordance with the ATEX European directive.
Following a careful on-site technical inspection, Tecnosida® proposes the construction of a multi-stage abatement system for dedusting, conveying and VOC treatment.
The collection step was performed through suction arms and hoods specially sized according to the geometry of the production machines and the specific suction needs. In this application the components are all ATEX certified in order to be used in a potentially explosive atmosphere
Air conveyoring was performed through the installation of specifically designed pipes used to bring air and pollutants from the sourcing area to the VOC abatement system;
The plant was built in compliance with Italian (Lombardy) BAT Best Available Technologies (D.MF.01 and AC.RI.01) and was able to reduce the emissions of pollutants well below manadatory legal limits, thus solving the customer’s problems.
In this third case history we go to describe an application referred to the production and packaging of liquid chemical products for plant protection and biocides for civil and professional use.
The customer contacted Tecnosida® for the replacement of a dust filtration system serving two mixers used for the production of insecticides and herbicides. The existing system was not compliant with current regulations (in particular the ATEX one) and did not respond to the needs of the customer because, over the years, the production lines were modified.
The Company also asked Tecnosida® to increase the filtering surface (50% more than the existing system), in order to increase operability.
After the initial contact, Tecnosida® carried out a technical-economic inspection during which customer’s needs and critical issues related to the available space were analyzed. In the specific case, there was a need for:
For these reasons, Tecnosida® designed a custom system, tailored to actual available space. This entailed the use of reduced height filter bags and the need to adapt all other components.
The ATEX dust filter was made of stainless steel and is composed of:
The system is also composed of:
As we have seen, the system and all its components have been manufactured in compliance with ATEX Directive and BAT reference cards.
Directive for the regulation of equipment used in areas with potentially explosive atmospheres
Harmonization of the laws of the Member States
VOCs: nature, classes of compounds and environmental effects!
Analyze with us the best technologies designed for VOCs abatement!
Origin and physical-chemical characteristics of the dust!
Discover more about dust filtration and collection alternative technologies and their working principles
Components and design for ATEX applications
Focus on the expedients needed to plan and create industrial aspiration systems
Focus on the expedients needed to plan and create industrial aspiration systems
Focus on the expedients needed to plan and create industrial aspiration systems
Focus on the expedients needed to plan and create industrial aspiration systems
Focus on the expedients needed to plan and create industrial aspiration systems
Focus on the expedients needed to plan and create industrial aspiration systems
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.