Self-cleaning bag filters | DUSTdown®

Reverse jet technology bag filters for industrial applications

What is DUSTdown® self-cleaning bag filter?

Dustdown® is a very high efficiency self-cleaning mechanical filter, equipped with an automatic on-line cleaning system with a Reverse Jet of compressed air. Dustdown® was designed by Tecnosida® to address the specific problems associated with treating emissions that contain a wide assortment of dust types; fine, very fine, potentially explosive (ATEX version), particulates, smoke and unburnt dust (BIOMASS version).

Gallery

How does the DUSTdown® bag filter work?

The air to be treated enters the lower part of the dust remover, passes through a pre-filtering chamber that allows the coarse dust to precipitate, protecting the filter from excessive dust loads. The flow then reaches the filtering surface and passes through it with consequent realization of the separation of the particulate.
The dust collected by the numerous sleeves then precipitates to the bottom of the filter where the hoppers direct it to the collection system (cochlea, rotary star valve, clapet valve or screw with conduit/pipe) or automatic discharge.The filtering surface is kept in perfect condition thanks to automatic cleaning cycles. These are managed on the basis of the filter pressure loss readings to limit the compressed air consumption (graph to the side) and increase the lifetime of the sleeves.

Filtering fabrics can also be made with different materials and with different features depending on the intended use. The following table shows the main variables:

MAXIMUM TEMPERATURE RESISTANCE TO HYDROLYSIS RESISTANCE TO ACID RESISTANCE TO ALKALI RESISTANCE TO OXIDATION
Polypropylene 90/100 excellent excellent excellent bad
Polyolefina for high temperature 125/130 excellent excellent excellent bad
Polyamide 110/115 bad moderate good moderate
Polyacrylonitrile c. 110/115 good moderate moderate good
Polyacrylonitrile o. 125/130 good good moderate good
Polyester 150/150 bad moderate bad good
M-aramid 180/220 moderate moderate moderate good
Polytetrafluoroethylene 250/280 excellent excellent excellent excellent

Strenghts of the DUSTdown® filter

  • CUSTOMISATION: The Dustdown® filter is built and configured according to the customer’s specific use and dimensional needs in terms of flow volume, quantity/quality of the dusts, (grain size) and temperature;
  • EFFICIENCY: The Dustdown® is designed to reach very high efficiency levels. More than 99.9% of the dust can be removed;
  • BY-PRODUCT RECOVERY: Dustdown® technology allows the recovered solid residues to be completely reused;
  • ECONOMY:  is considerably more economical in terms of purchase and maintenance costs, when compared with other dust removal technologies;
  • May be designed for low or high volumetric flow rates, being constituted by modular panels;
  • Is available in a version that is compliant with ATEX certification in accordance with the 2014/34/EU directive.

DUSTdown® standard equipments

  • Filtration chamber;
  • Filtering bag with snap ring;
  • Hopper with inspection hatches, collectors and support legs;
  • Pneumatic cleaning system of the bags/cartridges, set by a differential pressure switch/economizer;
  • Pre-separation chamber;
  • Ladder and railing for maintenance;
  • Triboelectric sensor (mandatory for some applications).

DUSTdown® available options

  • Pressure regulator;
  • Economiser;
  • Anti-fire systems;
  • Vibrators;
  • Insulation.

DUSTdown® filter: maintenance service

Tecnosida® is a perfect partner for planning and execution of ordinary and extraordinary maintenance services required to :

  • Verify filter’s proper functioning
  • Keep high filtration efficiency
  • Reduce economic and energetic wastes
  • Comply with safety and environmental rules and regulations

Contact us for more information

How useful was this post

Click on a star to rate it!

No votes so far! Be the first to rate this post.

Blog correlati

Private: Directive 94/9/EC ATEX

Directive for the regulation of equipment used in areas with potentially explosive atmospheres

Silica (SiO2) and silica powders

Find out with us the nature of this pollutant, its effects on health and how to treat it

Bags vs. Cartridges

Bags filter or cartridges filter? What is the best technology?

Powders and emissions treatment

Origin and physical-chemical characteristics of the dust!

Neutralizing system

How does they work? Which benefits they imply? Check out our new article!

Particulate: birth and effects

Particulate: formation, effects and treatment!

Dust filtration & collection

Discover more about dust filtration and collection alternative technologies and their working principles

Air pollution control equipment design in industrial applications

Focus on the expedients needed to plan and create industrial aspiration systems

Related case histories

Industrial aspiration systems

Focus on the expedients needed to plan and create industrial aspiration systems

Talcum powders abatement

Focus on the expedients needed to plan and create industrial aspiration systems

Heating and air filtration equipments for insulated panels production

Focus on the expedients needed to plan and create industrial aspiration systems

Aspiration and dust filtration systems in plastic and rubber production lines

Focus on the expedients needed to plan and create industrial aspiration systems

Are you interested in our abatement systems? Are you interested in our systems?
X

Manage Cookie Consent

To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.

Cookie Policy